Flexographic 4-8 Color Plastic Roll Ci Flexo Printing Machine

plastic flexo printing machine

Flexographic Printing Machine

BRIFE SPECIFICATION

n Substrate: PET/BOPP/PE/PAPER

n Printing section: 8

n Max. paper width：1320mm

n Max. printing width：1300mm

n Printing repeat：350mm – 810mm

n Register Tolerance: ±0.10mm

n Max. printing speed：500m/min (Machine running speed will be impacted by but not limited to following factors)

Ø Plate cylinder diameter

Ø Character of Substrate

Ø Character of ink and additives

Ø Printing Quality Request

Ø Flexo plate and tape

SMART OPERATION

Ø Job save/recall, save necessary data of job setup, make job repeat more easily

Ø If you do not follow the procedure, the machine will alarm automatically

Ø On-line monitoring of the whole machine status, real-time monitoring

Ø Lack of air pressure, auto alarm

Ø Camera based register-Camera based registration system

Ø Pre-register

Ø Remote control system-Long distance diagnosis

n Machine color: DongHang standard （GREY RAL7038 – WHITE RAL 9010）

n Plate thickness + tape thickness ： 1.14mm+0.5mm (decided by customer)

n Drying system: Electric heating/Gas/Steam/Hot oil

n Machine layout: Operator faces to the machine, unwinder in his left-hand direction

n Machine size: Please note the attached drawing

n Power supply and compressed air

Ø Power: 380V 3PH 50HZ

Ø Max. power:  

Ø Compressed air:0.6MPa (AIR COMPRESSOR UNINCLUDED)

Ø Compressed air Consumption :2 m³/min

n Cooling/conditioning water:

Ø Filtration clarity less than 20 Micron

Ø Min pressure：2 bar

Ø Max pressure：3 bar

Ø Inlet temperature 15C° - 18C°

Ø Hardness (CaCo2) 2.5 - 4mg/lt.

Ø PH 7 – 8.2

n Central impression drum conditioning: a closed loop conditioning unit

n Environment requirements for workshop

Ø Relative humidity: 30 -80% (at 20°C).

Ø Temperature: 15°C – 35°C

alisa whatsapp:86-136 2587 3008